Atomium™ Max Diesel Engine Oil
Additive For Trucks
USD $59.95
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Tribotechnical compounds MAX ENGINE create conditions under which the friction surfaces in engine parts are covered with a metallic protective layer, which has a special structure. This layer partially restores the dimensions and geometry of worn parts, optimizes gaps in friction pairs and retains more oil on the friction surfaces. It provides the following effects from the application of the compound:
INCREASed CAPACITY FUEL ECONOMYLOW OIL CONSUMPTION NOISE AND VIBRATION LEVELS REDUCTION TOXICITY REDUCTION PROVIDES MAXIMUM ENGINE PROTECTION DURING cold START
Drive 1250 miles (40 working hours for special machinery)Change the oil and oil filter
2 stageAdd the compound to the new oil:5 ml of compound per 1 quart of oil Use the vehicle to the next regular oil replacementChange the oil and oil filter Regular operation (or go to stage 3)
Please check my listing for heavy duty transmission & differentials oil additive: https://www.ebay.com/itm/256004128106
INCREASed CAPACITY FUEL ECONOMYLOW OIL CONSUMPTION NOISE AND VIBRATION LEVELS REDUCTION TOXICITY REDUCTION PROVIDES MAXIMUM ENGINE PROTECTION DURING cold START
Tribotechnical compound MAX ENGINE is applied in four stages in accordance with the following procedure:
- Warm up the engine to operating temperature (regular operation).
- Stop the engine.
- Stir the compound thoroughly until natural sediments (active components) are totally dissolved.
- Pour the composition into the oil filler neck of the engine at the rate of 5 ml per 1 quart of oil.
- After applying the engine should run (it is recommended to drive the vehicle) for no less than 20 - 25 min in the regular operation mode.
- After the procedure, you can use the vehicle as usual.
There are up to four stages of engine treatment. It is determined from the rate of 5 ml to 1 quart of motor oil. The number of stages depends on the vehicle's mileage:
- up to 125 000 miles – 2 stages;
- up to 300 000 miles – 3 stages;
- over 300 000 miles – 4 stages;
Full treatment is performed as follows:
1 stageAdd the compound to the working oil5 ml of compound per 1 quart of oilDrive 1250 miles (40 working hours for special machinery)Change the oil and oil filter
2 stageAdd the compound to the new oil:5 ml of compound per 1 quart of oil Use the vehicle to the next regular oil replacementChange the oil and oil filter Regular operation (or go to stage 3)
For engines with mileage more than 125 000 miles:
3 stageAdd the compound to the new oil:5 ml of compound per 1 quart of oil Use the vehicle to the next regular oil replacementChange the oil and oil filter Regular operation (or go to stage 4)For engines with mileage over 300 000 miles:
4 stageAdd the compound to the new oil:5 ml of compound per 1 quart of oil Use the vehicle to the next regular oil replacementChange the oil and oil filter Regular operationPlease check my listing for heavy duty transmission & differentials oil additive: https://www.ebay.com/itm/256004128106
Price type
IN STOCK
OUT STOCK
.
